Results 1 to 15 of 253

Thread: [GUIDE] Make a Reprogrammable Genesis Cart

Threaded View

  1. #11
    Join Date
    Mar 2009
    Location
    In a windowless van.
    Posts
    10,330
    Thanks
    98
    Thanked 705 Times in 331 Posts
    Blog Entries
    1
    EP Points
    1450

    Default

    Quote Originally Posted by Lotaphi View Post
    alright so I got a good deal on many 27c322 eproms and want to only use those. the first board I found as my first test was an acclaim 670128 that can be changed into a 32Mb board. I switched the jumper to J1 but it's still not working. while searching online I found an image of this board being used for a 32Mb game from default and it seems like it has some kind of resistor instead of the pure metal jumper

    20140531_005530_0863_pcb_front.jpg

    I programmed the unpadded rom (as people have been saying its not needed) and it doesnt work. I desoldered the rom and read it and did a hex compare to the original rom and they were the same.
    1. That is not a resistor, it is a jumper. You can tell becusse of the single black stripe. You're probably thinking "that's odd" but it was quite common to use since pick-and-place machines could grab them and place them.

    2. Did you "byte-swap" the rom image before programming it?

  2. The Following User Says Thank You to Jazzmarazz For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About Us

We are the oldest retro gaming forum on the internet. The goal of our community is the complete preservation of all retro video games. Started in 2001 as EmuParadise Forums, our community has grown over the past 18 years into one of the biggest gaming platforms on the internet.

Social