INSTALLING
You only need do this once
1. download and install ImgBurn 2.5.5.0 or higher from http://www.imgburn.com/
Thats it for installing
RUNNING
1. Run the program ImgBurn
2. Hit Write image file to disc
3. Insert your blank CD-R all cd images fit on a standerd sized CD-R
4. Under settings on the lower right change Write Speed to 1x (this will change it to burn at the lowest speed, that will more than likely be higher than 1x)
5. Under Source (top left) Hit the folder icon with a spy glass over it to the right of Source
6. Pick the disc image you wish to burn (If you are burning a CD disc image always pick the smaller descriptor file... cue, ccd or mds are the common ones)
7. Hit the big disc document icon with an arrow pointing to a disc (lower part of gui) to start burning
NOTES
DVD+R burning
Not all consoles support DVD+R media in there natural form but you can change the book type to DVD-Rom
This is not needed by most but if you are having problems with running DVD+R media then this is worth trying
To do that while on the main burning screen there is a icon on the lower right (an image of a book) click that
select the brand drive you own (make sure it can detect current settings)
under Change for, select (For DVD+R) or (For DVD+R/+R DL)
under New Setting, select DVD-ROM
DVD DL aka DVD9 for those you may or may not need Toxic Dual Layer Patcher, to first patch the images prior to burning, also note that a lot of PS2 consoles will struggle to read those, if that is the case then Rip the game to fit onto DVD5 discs