Nuts! lol.Originally posted by emu_kidid
here's that screenshot
Nuts! lol.Originally posted by emu_kidid
here's that screenshot
Here's my computer (not too great)..
320 MB DDR RAM
TNT2/16MB
PIII 450MHz
Windows XP Professional
Gateway Keyboard
Microsoft Standard Mouse
20GB HD
2.0MB Internet Connection
isnt XP really slow on that P3?
www.PacificMods.com
Selling modchip installation services, premodified consoles, and other cool stuff. Low costs and high quality products and services.
I have just ordered this today.
I'm hoping I don't need or want to upgrade the motherboard at least for a long time yet so I hope this will be a good PC .
At the mo I'm on ISDN but have orderd ADSL (Need to chase that up though.)
Motherboard Abit NF7-S Specs
Suported Processors:-
*AMD-K7/Athlon/ Athlon XP/Barton 200/266/333/400MHz FSB
Chip sets:-
* NVIDIA nForce�2 Ultra 400 chipset with MCP-T
* Supports Advanced Configuration and Power Management - Interface (ACPI)
* Accelerated Graphics Port connector supports AGP 8X/4X (0.8V/1.5V)
supported memory
* Three 184-pin DIMM sockets
* Supports 3 DIMM DDR 200/266/333 (Max. 3 GB)
* Supports 2 DIMM DDR 400 (Max. 2 GB)
Serial ATA150 RAID
* On board SATA 150 PCI Controller
* Support 2 ports SATA 150 RAID 0/1
Audio
* 6-Channel AC 97 CODEC on board
* Professional digital audio interface supports optical S/PDIF Out
* NVIDIA SoundStorm with real-time Dolby Digital 5.1 encoder
IEEE 1394
* Supports IEEE 1394a at 100/200/400 Mb/s transfer rate
LAN
* On board 10/100M LAN Physical layer interface
ABIT Engineered
* ABIT SoftMenu� Technology
* ABIT MaxFID� Technology
* ABIT SERILLEL�
* ABIT CPU ThermalGuard�
Internal I/O Connectors
* 1 x AGP8X/4X, 5 x PCI slots
* 1 x Floppy Port supports up to 2.88MB
* 2 x Ultra DMA 33/66/100/133 Connectors
* 2 x SATA 150 Connectors
* 2 x USB 2.0 headers, 2 x IEEE1394 header
* 2 x CD-IN
* 1 x IrDA
Back Panel I/O
* 1 x PS/2 Keyboard, 1 x PS/2 mouse
* 2 x Serial, 1 x Parallel
* 1 x S/PDIF Out port
* Audio connectors (Front Speaker, Line-in, Mic-in, Center/Sub, Surround Speaker)
* 2 x USB 2.0, 1 x RJ-45 LAN Connector
Miscellaneous
* ATX form factor
* Hardware monitoring - Including Fan speeds, Voltages, System
* environment temperature
CPU
*AMD *Retail* Athlon XP 2600+ *333 FSB* (2.08 GHz) with AMD Heat Sink Fan
Memory
* 1x 512Mb PC3200 (PC400) DDR Memory (Major)
Hard drive
* IDE 120Gb Maxtor ATA-133 (7200rpm, 8MB Cache, 8.5ms) Quiet Drive Technology (Ran low on cash otherwize I would have gone for the SATA virsion instead of an IDE version)
Floppy
* 1.44Mb SONY Floppy Disk Drive
Stuff I will pass on from my existing PC
I will want to upgrade this stuff aswell sometime in the near future.
Graphics Card
* ELSA Gladiac 511 TV-OUT GeForce2 MX400 64MB SDRAM
DVD Drive
* PC DVD Encore 12x iNFRA with Dxr3 card decoder with TV out
CD R/RW
* Iomega ZipCD 650 4x R 4x RW 8x read External USB
The rest of it
* Monitor (Max res 1024x768 )
* Keyboard (Just a regular one)
* Mouse (Optical I.E. no mouse ball(Not infa red))
* I have a spare CPU/Motherboard case that covers the stats needed for the new Motherboard and CPU
* x2 USB to PSX/PS2/N64 control Pad converter
Do you guys think I made the right choices for this? (On the new stuff that is the rest I still want to upgrade but will just have to wait)
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR
That depends. Are you on a budget or do you want to build the most blazing PC possible? If you are on a budget, tell me the maximum amount you are willing to spend.
Regardless, that is a good PC for anyone... gamers, programmers, and media encoders alike. You can't go wrong with Abit. That is a great company. 512MB of RAM is sufficient and your CPU is a good combination of price/performance. The only major additions you need are a new video card, and perhaps a sound card if you are an audiophile like me and you can't bear the standard on-board 6 channel audio.
<img src="http://anime.emuparadise.org/sig.jpg" border="0">
Well I orders all that already and I only had a budget of �340.00 and used every penny just about on the above.
There was other stuff that looked like it could be better so what I have settled for is the best I could out of what I had in the way cash.
Hmm I actually liked the sound of 5.1 audio. better than sounds cards I have had in the past.
But yeah
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR
�340! Wow, you just worked all of that under budget. Good job. That is the best you can get for that price.
<img src="http://anime.emuparadise.org/sig.jpg" border="0">
glad ya think so all I realy need now is a new Graphics card,
but like I said I will just have to wait for that.
I havn't even started looking yet I think I will get some advice on the Card as some of the GeForce 4 cards are not even as good as my GeForce 2 in alot of ways (I'm not even talking about the TV-Out bit either)
I will be sticking to nVIDIA I think for the graphics though
Well anything just about is better than the PC I am on now my lil PIII 450 Slot 1 with the max I can have of memory 256mb and a slow 12gig HD.
Last edited by Zorlon; 11th-July-2003 at 22:50.
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR
to the best of my knowledge, this is mine:
Windows 2000 Professional
Intel Pentium III 450 MHz(?)
Geforce4 MX 440 (PNY Verto)
Gamesurround Muse LT Sound Card
196MB ram
4.3GB and 40GB hard drives
IBM LG CRD-8400B CD-ROM drive
Small crappy Monitor...
You might just want to use the nForce2' integrated grahpics instead of your Geforce 2 in the meantime. It's performance is likely equal to the Geforce 2, though I have not seen comparative benchmarks.Originally posted by Zorlon
I havn't even started looking yet I think I will get some advice on the Card as some of the GeForce 4 cards are not even as good as my GeForce 2 in alot of ways (I'm not even talking about the TV-Out bit either)
I will be sticking to nVIDIA I think for the graphics though.
<img src="http://anime.emuparadise.org/sig.jpg" border="0">
If your goin AMD get the new operton CPUs. 64 bit = cool. there kinda expensive still tho, 250$ at least for one i think.
www.PacificMods.com
Selling modchip installation services, premodified consoles, and other cool stuff. Low costs and high quality products and services.
Originally posted by Magus
You might just want to use the nForce2' integrated grahpics instead of your Geforce 2 in the meantime. It's performance is likely equal to the Geforce 2, though I have not seen comparative benchmarks.
You will never see comparitive benchmarks as the nVIDIA nForce�2 Ultra 400 chipset with MCP-T is not intergated graphics
This is what nVIDIA say about the chipset I will have:-
Introducing the NVIDIA nForce2 Ultra 400 and NVIDIA nForce2 400
The NVIDIA nForce2 Ultra 400 incorporates dual 400MHz DDR controllers, delivering twice the bandwidth of typical DDR chipsets, an optimized 128-bit architecture, and 400MHz frontside bus (FSB) support for unparalleled performance. The NVIDIA nForce2 400 relies on a single 64-bit memory channel to deliver 400 MHz FSB and 400MHz DDR performance to the mainstream.
NVIDIA nForce2 unleashes blistering system performance and Dolby� Digital 5.1 audio for today's most demanding users. Combine it with an NVIDIA-based performance graphics card, and you've got a PC for the most tricked-out performance and immersive gaming environments ever experienced on a desktop PC.
Look for the latest NVIDIA nForce2 Ultra 400 platform processors powering the ultimate gaming platforms. Incorporating dual 400 MHz DDR memory controllers, a 128-bit architecture, and 400MHz frontside bus (FSB) support, the NVIDIA nForce2 Ultra 400 eliminates system bottlenecks and speeds up applications so you can play harder and faster.
Unmatched system performance: NVIDIA nForce2 delivers blistering platform performance through patent-pending system technologies, a revolutionary memory architecture--including DualDDR memory controllers--and high-bandwidth connectivity solutions.
Screaming graphics: Combine the system performance of NVIDIA nForce2 with the latest NVIDIA-based add-in card for ferocious 3D graphics power. The NVIDIA nForce2 architecture also provides an AGP 8X graphics slot, so that users can upgrade to to the most powerful GPU solutions available.
NVIDIA SoundStorm� cinematic quality 3D positional audio: NVIDIA SoundStorm, part of the NVIDIA nForce2 audio processing unit (APU) encodes audio in Dolby Digital 5.1 format for full surround sound effects, and processes up to 256 simultaneous audio streams to drive your home theater experience.
Ultimate connectivity: NVIDIA StreamThru� technology combined with a chip-to-chip HyperTransport� interface delivers the fastest and smoothest video and audio streaming. The NVIDIA nForce2 MCP-T also includes integrated DualNet Ethernet controllers, up to six USB 2.0 ports, Ultra ATA133 connections, and a FireWire� port, providing the ultimate in networking and digital connectivity.
Not that I know what all that means but I do know that, the motherboard that I'll be getting doesn't have the graphics built in.
Last edited by Zorlon; 12th-July-2003 at 03:03.
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR
They are expensiveOriginally posted by jerome187
If your goin AMD get the new operton CPUs. 64 bit = cool. there kinda expensive still tho, 250$ at least for one i think.
AMD *Retail* Opteron 242 64Bit CPU with AMD Heat Sink Fan 3Yr but there like �521.24 or �612.46 with the VAT added plus you will need a motherboard that can take em and thats another costly effort and way out of my budget I payed 2 3rds of that and got a Motherbord, CPU ,120 gig HD and 1x 512 (400mb) mem chip.
AMD Opteron may be cool but HOW MUCH (If only I was rich LOL)
Last edited by Zorlon; 12th-July-2003 at 02:43.
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR
I guess it's a bit late now...but you should have gone w/ 2 sticks of 256 mb instead of 1 stick of 512 mb. The nForce supports dual bandwidth for the memory which means the memory runs fastest in pairs.
I got the 1 512 running at 400 in preperation to get another one LOL just costs to much for me to get 2 with in the bulk of the rest
Mod projects - XBOX
Phantasy Star Online Episodes 1 & 2 - online quests in offline mode packs [COMPLETE]
[Quest Packs Collection]
GTA San Andreas - Hot Coffee [COMPLETE]
[Mod ready] & [Full ISO ready]
GTA San Andreas - Real Car Names extra content mod [WIP] [Back burner, just won't have the time ]
Please can all ESR users post your results here to help with the project and others wanting to use ESR