Good morning I tried to make a repro with the help of some guides on this forum. Unfortunately, I have not had any hopeful results and I would like to know where I'm wrong.
Here are the tools I used:
EPROM 27C160.
https://www.dropbox.com/s/0bxgemw99j..._160.jpeg?dl=0
GAME: ART OF FIGHTNG (E) converted from md to BIN by SBWIN: http://www.emutopia.com/index.php/do...ion/1077-sbwin and BYTESWAPPED.
Board used: Mega Games 3in1 Vol 1 (same size of ART OF FIGHTING).
https://www.dropbox.com/s/fq1rkbobfs...used.jpeg?dl=0
MiniPro EPROM WRITER: http://www.autoelectric.cn/en/tl866_main.html
42 pin adapter: http://github.com/keirf/PCB-Projects
https://www.dropbox.com/s/0bxgemw99j..._160.jpeg?dl=0
I tried 2 different configurations:
https://www.dropbox.com/s/thdyhrnshwuj33f/two.png?dl=0
https://www.dropbox.com/s/exn5nd2805mefax/one.png?dl=0
and burnt with this settings (according with jumpers):
https://www.dropbox.com/s/2jvvfiexp8...mpers.png?dl=0
BUT when i put in my sega mega drive (model 1) i got black screen.
I downloaded a "howto manual" for burning eproms, then i followed the guide : MANUAL USED
I compared bank4 (that i burnt) with bank4 on the chip (read after).
https://www.dropbox.com/s/ujvlahq8qv...banks.png?dl=0
Can someone help me?
Every suggestion will be appreciated.
Thanks.