The Mass Effect out: Isn't the ending great guys (plus other spoilers).

[deadlegion]

Lets see. I found one gentleman who has realeased the schematic and software online:
http://pontoppidan.info/lars/index.p...mmc2iec&page=2
I can get a minimum of 10 boards of that size for 20 USD, and parts for roughly another 12 USD. Shipping to you would be 23.95 USD or less (but not much less...)
There you go, its a deal. Send me $60 and I'll send you a completed card granted you can installed it yourself.

But seriously I could for $60.

It's ok dude, I was just kidding don't stress.
For $80 I can get one all ready to go, with a full manual.
They don't seem to be all that hard to find...and there's a couple of different ones.
One in particular is around 100 euro, and it's supposed to be better than the others (I should probably read some more).

Shipping from Europe is cheaper than what you quoted anyway (no surprise there, happens all the time for me).

[Raype]

I went into the other room to find the GF asleep with helf glass of wine in her hands. Good thing Im so caring, else I may not have taken it from her ... after shooting a photo of course.

I think the important thing isn't what you took from her, but what you gave to her.

If you know what I mean.

[Raype]

I wish it would cool off.

Move further north. It's nature's air conditioning.

Even if it is for the birds.

[Jazzmarazz]

It's ok dude, I was just kidding don't stress.
For $80 I can get one all ready to go, with a full manual.
They don't seem to be all that hard to find...and there's a couple of different ones.
One in particular is around 100 euro, and it's supposed to be better than the others (I should probably read some more).

Shipping from Europe is cheaper than what you quoted anyway (no surprise there, happens all the time for me).

I like this one. An easy and cheap build.
http://www.marc-schaffer.ch/Elektron.../SD2IECBP.html
I might do another Group-Printing on my vintage compy site and have all of my buyers pay for mine.

I think the important thing isn't what you took from her, but what you gave to her.

If you know what I mean.

[Drageuth]

Kiddo is exhausting some days.

[Milady]

Did I really just sleep for like 4 hours?

Stupid property manager is coming over tomorrow afternoon to look at my leaky kitchen sink before we figure out who to have come and fix it.

I also go back to work tomorrow night, and I can't get her to understand that she needs to come in the morning so I can stay up, or the evening so I can wake up early. Not right in the middle of the freakin day when it's going to screw me up no matter what I do. And I'm working the next three nights, so not sleeping well on the first night pretty much dooms me to misery for the night four days.

Also, this week is the last week if this schedule, so there better be a new one when I get there tomorrow. And it better not be shitty like the last draft I saw.

[Sprung]

Did I really just sleep for like 4 hours?

Stupid property manager is coming over tomorrow afternoon to look at my leaky kitchen sink before we figure out who to have come and fix it.

I also go back to work tomorrow night, and I can't get her to understand that she needs to come in the morning so I can stay up, or the evening so I can wake up early. Not right in the middle of the freakin day when it's going to screw me up no matter what I do. And I'm working the next three nights, so not sleeping well on the first night pretty much dooms me to misery for the night four days.

Also, this week is the last week if this schedule, so there better be a new one when I get there tomorrow. And it better not be shitty like the last draft I saw.

Leaky sink? Just check the nuts in the pipes.

[Sheras]

time to kill

[Milady]

Leaky sink? Just check the nuts in the pipes.

I already did. It seems to be related to the hookup where the motor for the garbage disposal attaches to everything else, but I can't seem to find anything that I can tighten more than it is already. Or a super clear source for the water to be coming from, anyway.

[deadlegion]

Leaky sink? Just check the nuts in the pipes.

Just needs a little plumber's tape on the thread

[deadlegion]

u need mario bros

[Sprung]

I already did. It seems to be related to the hookup where the motor for the garbage disposal attaches to everything else, but I can't seem to find anything that I can tighten more than it is already. Or a super clear source for the water to be coming from, anyway.

The disposal mounts to the flange with a ring that has 3 little tabs that hook on, and you rotate it to the right. It's quite common for one of the little tabs to slip off if the disposal has been bumped when putting stuff under the sink.

It's an easy fix, but you have to make sure you support the disposal when you loosen it, or it will drop rather quickly. I usually stick my knee under it and loosen it, then reseat it.

Or wait for maintenance.

[Iamerror]

Finally able to sit and relax for a minute.

[Milady]

The disposal mounts to the flange with a ring that has 3 little tabs that hook on, and you rotate it to the right. It's quite common for one of the little tabs to slip off if the disposal has been bumped when putting stuff under the sink.

It's an easy fix, but you have to make sure you support the disposal when you loosen it, or it will drop rather quickly. I usually stick my knee under it and loosen it, then reseat it.

Or wait for maintenance.

It shouldn't have been bumped, I only keep a few things under there and never on that side, since it's a two sided sink.

But whatever, I'm lazy and I'm not footing the bill, so someone else can come fix it.

Or maybe the weirdo property manager knows how to fix stuff. Not especially sure why she needs to look at it before we can have somebody fix it, when I could have just had someone come and fix it today AND AVOIDED ALL OF THIS.

Oh well, I'll make her take my rent check while she's here so I don't have to worry about it over the weekend.

[Raype]

Leaky sink? Just check the nuts in the pipes.

Shit, I really haven't been around much lately.

The things I can do with posts like these....