epsxe 1.7 and wired 360 controller, rumble not working

[rmcin329]

Well the problem i'm having is that the rumble feature is not working. The driver for the controller is dated 4/8/2009 and a newer one cannot be found when i select check for new drivers. Epsxe is configured to a dualshock controller and is set to dxJoy1 with big and small motors set to sine. I've also tried dxjoy2, 3, and burutter all to no avail. Suggestions?

[Balamatrix]

I found a thread here where someone was having a similar issue except with a ps3 controller. It was a 64bit OS issue. Take a look it might help you out eventhough it isnt a 360 controller.

http://forums.motioninjoy.com/viewtopic.php?f=3&t=1738

[Balamatrix]

further down that thread there is a link to another post which explains another solution in case you didnt catch it.Here is the link.

http://forums.motioninjoy.com/viewtopic.php?f=21&t=1739

I dont have a wired 360 or ps3 controller to try it myself but he claims this fix will work for all emulators using direct input. Hope that helps

[Zaladane]

http://www.epforums.org/showthread.p...=rumble+driver


http://www.epforums.org/showthread.p...=rumble+driver

[ponury_indor]

http://www.epforums.org/showthread.p...=rumble+driver


http://www.epforums.org/showthread.p...=rumble+driver

Yea, installing XBCD will enable rumble in ePSXe but may also disable it in PCSX2...