Gens 32x Bios setup question
I'm using the latest Gens2.11 emulator, and have the 32x bios files extracted to its main directory.
The Gens readme file describes the 32x Bios files as such:
Your files should have the following size :
M68000 BIOS (32X_G_BIOS.BIN) = 256 bytes
Master SH2 BIOS (32X_M_BIOS.BIN) = 2048 bytes
Slave SH2 BIOS (32X_S_BIOS.BIN) = 1024 bytes
However, the 32x bios download available here on EmuP. only contains two files labeled 32x_BIOS(~2kb) and 32x_slave_BIOS(~1kb).
I have read the config readme files, and setup the Options>Bios/Misc Files>32X Bios directories as follows:
M68000 BIOS = 32x_BIOS(~2kb)
Master SH2 BIOS = 32x_BIOS(~2kb)
Slave SH2 BIOS = 32x_slave_BIOS(~1kb)
Since the Sega-32x_Bios.zip only contained the two files I tried that setup. I am not sure if the zip file available here does not contain all the necessary files for the 32x, or if I am supposed to be looking for the M68000 Bios somewhere else.
The two ISO's I have tried so far are Knuckles Chaotix 32x iso (both 5 and A,) and Afterburn 32x (also both versions.) Niether loaded up. However, Gens does not give me a Bios error. I have tried leaving the Options>Bios/Misc Files>32X Bios>M68000 Bios directory location to the default {.\} (ie. blank). That, however, caused Gens to report a 32x Bios config error.
To add a final note, the Gens readme directs you to www.eidolons-inn.de to acquire the 32x Bios files. Unfortunately, despite being of Dutch decent, I cannot read the Dutch language, and am at a loss as to what to do next. Any help would be greatly appreciated. Finally, I'd just like to thank everyone at EmuP. for developing such a great site. Thankyou.
]