Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: connecting 2 computers so both have dsl

  1. #1
    Join Date
    Mar 2002
    Posts
    854
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default connecting 2 computers so both have dsl

    I just got DSL, and have set it up on one of my computers. However, I want to have the other computer also receive DSL internet access. Is it possible to do this?

    If I install a second network card on the computer already with DSL, having 1 network card connect to the modem and the other network card connect to the other computer, will it work?

    Thanks


    PSX - Crash Bash [NTSC]
    PSX - Vagrant Story [NTSC&PAL]
    PSX - Crash Bandicoot 3 Warped [NTSC]
    PSX - Azure Dreams [NTSC]
    PSX - Hydro Thunder [NTSC]
    :::[DOWNLOAD PSX ISOS FROM OMNIROM.TK]:::

  2. #2
    Join Date
    Jun 2004
    Posts
    10,584
    Thanks
    0
    Thanked 4 Times in 4 Posts
    EP Points
    5

    Default

    Yes you could do that, but i'm not really sure how to do it .
    I beleive you can also buy a router, for about 40 bucks which will do the trick, with probably less hassle and better reliability. If you want to buy a router, stay really really far from US Robotics, their firmware sucks.<
    D-Link, Linksys and Cisco are good brands.

  3. #3
    Uncle Evil Guest

    Default

    we have a netgear wireless router, you dont HAVE to use the wireless ends you can just use a cable, you can also get a switch which is cheaper and works just as well except i dont think they have hardware firewalls in them we use both a router and the switch, the router is just connected to the cable and my dads computer and then a cable running from it to my room where it plugs into the switch and i have 2 computers plugged into the switch

  4. #4
    Join Date
    Oct 2004
    Location
    Jewpan
    Posts
    90
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Assuming you have Windows XP ? and want to go the cheap way, all you have to do is hook up the two computers with a crossover ethernet cable, and activating Internet Connection Sharing (Control Panel>Network Connections>), by right clicking your DSL connection, going to Properties and then the 'Advanced' tab. Under 'Internet Connection Sharing', check 'Allow other users to connect through this computer's internet connection'. Although this is the cheap way, you won't be able to access the internet unless your gateway/ICS host computer is turned on.

  5. #5
    Join Date
    Dec 2004
    Location
    Scranton, Pennsylvania USA
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    For windows XP... wouldn't bridging the connections have the same affect??
    -Komodo and the PSKITSo ownz you!

    http://www.crazedmindz.com

    -Komodo (6) - Dragon Soldier.
    http://www.dragon-soldier.net

  6. #6
    Join Date
    Dec 2003
    Location
    Indiana, United States
    Posts
    26,489
    Thanks
    61
    Thanked 221 Times in 99 Posts
    EP Points
    75

    Default

    Quote Originally Posted by Komodo
    For windows XP... wouldn't bridging the connections have the same affect??
    Yes, but you still have to enable ICS to manage the IP addressing.

  7. #7
    Uncle Evil Guest

    Default

    I still say get a switch, you can get a decent one now for like 15 bucks

  8. #8
    Join Date
    Jun 2004
    Posts
    10,584
    Thanks
    0
    Thanked 4 Times in 4 Posts
    EP Points
    5

    Default

    Switch sucks. Get a hub.

  9. #9
    Uncle Evil Guest

    Default

    well a switch works as a hub thats why its called a switch, one switch is uplink and the other switch is hub

  10. #10
    Join Date
    May 2004
    Location
    NY
    Posts
    4,658
    Thanks
    1
    Thanked 14 Times in 4 Posts
    EP Points
    85

    Default

    You guys arent very good when it comes to this stuff. A hub is a multiport repeater, and simply regenerates a connection to go further then 100meters (if using Cat-5 cable), while also splitting a connection, but has no effect on a collision domain. A switch fowards frames, and creates more collision domains (which is good). A router (a real router) creates more broadcast domains, and uses routing and routed protocols to select the best path to get from point A to B.

    Sorry, taking Cisco Networking, had to clear up some confusion.

  11. #11
    Uncle Evil Guest

    Default

    yeah so using a switch still works though

  12. #12
    Join Date
    Jun 2004
    Posts
    10,584
    Thanks
    0
    Thanked 4 Times in 4 Posts
    EP Points
    5

    Default

    Quote Originally Posted by Borman
    You guys arent very good when it comes to this stuff. A hub is a multiport repeater, and simply regenerates a connection to go further then 100meters (if using Cat-5 cable), while also splitting a connection, but has no effect on a collision domain. A switch fowards frames, and creates more collision domains (which is good). A router (a real router) creates more broadcast domains, and uses routing and routed protocols to select the best path to get from point A to B.

    Sorry, taking Cisco Networking, had to clear up some confusion.
    You should then know that a switch has to manage each connection at once, while a hub does not have to do anything with it except fowarding it. Best speed on huge loads then if your using a hub.

  13. #13
    Join Date
    Mar 2004
    Location
    Wisconsin, USA
    Posts
    595
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    You should then know that a switch has to manage each connection at once, while a hub does not have to do anything with it except fowarding it. Best speed on huge loads then if your using a hub.
    I took Cisco as well. Yes, it does allow faster speeds, but I think everyone is a little more woried about the security end of it. If you like trojans, fine, but otherwise, get a router. there's your best bet...

  14. #14
    Join Date
    Mar 2002
    Posts
    854
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Does anybody know how to bridge the two connections? I tried it but windows xp said that in order to bridge connections, they can't have ICS enabled


    PSX - Crash Bash [NTSC]
    PSX - Vagrant Story [NTSC&PAL]
    PSX - Crash Bandicoot 3 Warped [NTSC]
    PSX - Azure Dreams [NTSC]
    PSX - Hydro Thunder [NTSC]
    :::[DOWNLOAD PSX ISOS FROM OMNIROM.TK]:::

  15. #15
    Join Date
    Jun 2004
    Posts
    10,584
    Thanks
    0
    Thanked 4 Times in 4 Posts
    EP Points
    5

    Default

    Quote Originally Posted by master
    I took Cisco as well. Yes, it does allow faster speeds, but I think everyone is a little more woried about the security end of it. If you like trojans, fine, but otherwise, get a router. there's your best bet...
    Dedicated computer as my firewall.
    Oh well, get a router.

    But what do you mean by "they can't have ICS enabled" ?

Similar Threads

  1. SBC DSL Question
    By omni_rom in forum Computer Corner
    Replies: 7
    Last Post: 25th-November-2003, 07:15
  2. DSL modem query
    By Solitude in forum Computer Corner
    Replies: 8
    Last Post: 19th-August-2003, 08:24
  3. dsl slow downloads????
    By redd18 in forum Free 4 All
    Replies: 18
    Last Post: 25th-June-2002, 21:01
  4. Computers syyy...
    By Sephires in forum Free 4 All
    Replies: 6
    Last Post: 2nd-April-2002, 06:03
  5. Cable vs DSL
    By buzzyon in forum Free 4 All
    Replies: 19
    Last Post: 21st-March-2002, 00:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About Us

We are the oldest retro gaming forum on the internet. The goal of our community is the complete preservation of all retro video games. Started in 2001 as EmuParadise Forums, our community has grown over the past 18 years into one of the biggest gaming platforms on the internet.

Social