The Jazz Out: 4000 Posts of Holo to Lure Him Back

[Grouch]

Found a junk PSP Go Black, scratches all over it, missing thumb stick module and battery but both appear to have been removed correctly.
Going to source cheap replacement parts to see if it still works. If the screen is fucked I'll replace that too. Wish me luck

weren't those digital only?
are you planning on putting cfw on it?

[Slacker Magician]

They are digital only. If I got one I'd install CFW on it first thing .

[Grouch]

They are digital only. If I got one I'd install CFW on it first thing .

that's what I thought. yeah you pretty much have to at this point since psn is dead on psp.

[Slacker Magician]

that's what I thought. yeah you pretty much have to at this point since psn is dead on psp.

I guessed that was probably the case.

One of the spikes on the heatsink is a bit loose (more specifically the plastic bit surrounding the spike). It locks fine once it's in place but you'll want to be careful installing it. It's puny so it shouldn't be any trouble.

[Grouch]

I guessed that was probably the case.

One of the spikes on the heatsink is a bit loose (more specifically the plastic bit surrounding the spike). It locks fine once it's in place but you'll want to be careful installing it. It's puny so it shouldn't be any trouble.

spikes? are those what hold it to the board?

[deadlegion]

weren't those digital only?
are you planning on putting cfw on it?

Yes.
Yes, when I eventually get it working properly. I don't care if it looks beat up really, but I need to replace the obviously missing stuff first then anything else that isn't 100% functional.

[Slacker Magician]

spikes? are those what hold it to the board?

Yes. I have a different one from the attached image but, the mounting mechanism is the same. I pinched it back together, lifted the board to make sure they were through, and then locked them in.

Image1.jpg

[Slacker Magician]

Yes.
Yes, when I eventually get it working properly. I don't care if it looks beat up really, but I need to replace the obviously missing stuff first then anything else that isn't 100% functional.

I don't mind scuffs and such myself as long as they don't make something uncomfortable to use or otherwise impair function.

[Ragnar]

weren't those digital only?
are you planning on putting cfw on it?

The only real problem is the stupid M2 memory cards. I think the large ones were even prone to failure...

[Grouch]

Yes. I have a different one from the attached image but, the mounting mechanism is the same. I pinched it back together, lifted the board to make sure they were through, and then locked them in.

Image1.jpg

ok. the last time I built a pc the heatsink attached to the socket for the cpu with a metal strap so this is quite different.

I don't mind scuffs and such myself as long as they don't make something uncomfortable to use or otherwise impair function.

I'm the same.

[deadlegion]

The only real problem is the stupid M2 memory cards. I think the large ones were even prone to failure...

You can get adapter cables: m2 to memory stick micro SD adapter (either single or dual). You can either fit it inside the standard case next to the battery (you need to trim a little bit of stuff iirc), or if you get power armor enlarged rear case you have plenty of room to mount it in there. The power armor lets you install a PS Vita battery.

The card adapters let you run like 128GB afaik, maybe more.

[Slacker Magician]

I'd use the internal memory, 16GB is plenty for PSP.

[Grouch]

I'd use the internal memory, 16GB is plenty for PSP.

I wouldn't say plenty but good enough unless you want the whole library.

[Slacker Magician]

Unless someone wants to have 20+ games on there at once I think it's pretty good .

[Slacker Magician]

You could probably fit that or more within 16GB as long as the games were compressed.