Problem making SEGA Repro

Good morning I tried to make a repro with the help of some guides on this forum. Unfortunately, I have not had any hopeful results and I would like to know where I'm wrong.
Here are the tools I used:

EPROM 27C160.

https://www.dropbox.com/s/0bxgemw99j..._160.jpeg?dl=0

GAME: ART OF FIGHTNG (E) converted from md to BIN by SBWIN: http://www.emutopia.com/index.php/do...ion/1077-sbwin and BYTESWAPPED.

Board used: Mega Games 3in1 Vol 1 (same size of ART OF FIGHTING).

https://www.dropbox.com/s/fq1rkbobfs...used.jpeg?dl=0

MiniPro EPROM WRITER: http://www.autoelectric.cn/en/tl866_main.html

42 pin adapter: http://github.com/keirf/PCB-Projects

https://www.dropbox.com/s/0bxgemw99j..._160.jpeg?dl=0

I tried 2 different configurations:

https://www.dropbox.com/s/thdyhrnshwuj33f/two.png?dl=0

https://www.dropbox.com/s/exn5nd2805mefax/one.png?dl=0

and burnt with this settings (according with jumpers):

https://www.dropbox.com/s/2jvvfiexp8...mpers.png?dl=0

BUT when i put in my sega mega drive (model 1) i got black screen.

I downloaded a "howto manual" for burning eproms, then i followed the guide : MANUAL USED

I compared bank4 (that i burnt) with bank4 on the chip (read after).

https://www.dropbox.com/s/ujvlahq8qv...banks.png?dl=0

Can someone help me?

Every suggestion will be appreciated.

Thanks.