Sega Saturn Swap Trick (Physical Modification)
Alright, I just got done doing this simple modification for the first time. Anyone should be able to do this if they have access to tape, and a screwdriver.
First, flip over your Saturn console, and remove all screws. There are no hidden screws on this system (not on mine, shouldnt be on any). There should be around 5 screws total.
http://img.photobucket.com/albums/v4...k/PICT0128.jpg
Once all screws are out, remove the top cover.
http://img.photobucket.com/albums/v4...k/PICT0129.jpg
Now, notice where the eject sensor is located.
http://img.photobucket.com/albums/v4...k/PICT0130.jpg
Next, tape the two together (test the system while holding the sensor if you are unsure how to tape)
http://img.photobucket.com/albums/v4...k/PICT0135.jpg
Test your system with a game. If all is well, then your disk should spin up and play!
http://img.photobucket.com/albums/v4...k/PICT0136.jpg
Put the system together, and play as you need!
http://img.photobucket.com/albums/v4...k/PICT0139.jpg
http://img.photobucket.com/albums/v4...k/PICT0137.jpg
If you have any questions, post here!