hey i cant get it to work on my psp via memory card is this due to my firmware
3.40 oe-a do i need a more current custom firmware?
hey i cant get it to work on my psp via memory card is this due to my firmware
3.40 oe-a do i need a more current custom firmware?
The game works on 3.40 OE-A. Either:
1. You got a bad ISO
2. You are running too many plugins
3. You have enabled No-UMD in the recovery menu
4. The No-UMD is disabled but you don't have a UMD placed in the drive.
5. You got a corrupt flash1. If all other ISOs/CSOs won't work then go to recovery menu, go to Advanced -> Toggle Flash1 (there must be a USB cable connected from your psp to your PC) and delete config.se in the root of flash1.
1.i've gone through two MHF's
2 how do i change it?
345 other isos work
could it be that its a 6-- mb cso and it cant unpack its self?
Last edited by Squeble001; 20th-August-2007 at 01:58.
Read 3 and 4 again.
Monster Hunter Freedom doesn't run in NO-UMD emulation as of 3.40OE.
If problems still occur, I recommand running it from the UMD.
Regards,
fireblaster_lyz
Help in setting or using ePSXe? Get all the info you need using the ePSXe Configuration Handbook