I've been meaning to write this for a while now.
This faq is how to make an import dreamcast run in your region with out a stepdown/stepup electrical converter.

Mostly usefull for people in europe who have ntsc dreamcasts,
that are tired of the step down bullshit.


What you will need:
The dreamcast you wish to mod.
A dreamcast from your region.
A screw driver(phillips).
An ice cold soda.

1.open up the dreamcast you want to mod and remove the powerboard.
if the dreamcast is facing you its the one to the back left hand side.

2.open the other dreamcast,take out the power board of that one too.

3.chuck the local powerboard into the import dreamcast.

4.screw it all back together.

5.drink the soda.



Ill be posting some pictures soonish.

Any Q's are welcome/